REVIEW OF STRENGTHENING TECHNIQUES AND MECHANICAL TESTING FOR UNREINFORCED MASONRY
DOI:
https://doi.org/10.20319/mijst.2017.32.3350Keywords:
Unreinforced Masonry, E xperimental Testing, S tructural Rehabilitation, Mechanical ParametersAbstract
In this paper, it is presented a collection and a critical review on the most significant research done on unreinforced masonry, types of testing, behavior and strengthening techniques to improve structural its structural performance. Furthermore, these researches are categorized and critically analyzed to benefit verities of them and help further understand behavior of URM. This study provides summary and guidance for researchers who are working on strengthening, modeling and retrofitting methods
References
Alcocer, S. M., & Klinger, R. E. (1994). Masonry Research in the Americas. Masonry in the Americas, 147, 127-169.
American Concrete Institute. (2002). State-of-the-art Report on Fiber Reinforced Concrete. ACI.
ASCE. (2007). Seismic Rehabilitation of Existing Buildings – SEI/ASCE 41-06. Reston. VA: American Society of Civil Engineers; 2007. https://doi.org/10.1061/9780784408841
ASTM. (2003). ASTM C 270-03, Standard Specification for Mortar for Unit Masonry. West Conshohocken, PA: ASTM International.
ASTM International. (2002). ASTM E519-02, Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages. West Conshohocken, PA.
Atkinson, R. H., & Noland, J. L. (1983). A proposed failure theory for brick masonry in compression. 3rd Canadian Masonry Symposium,, (pp. 5.1-5.17). Edmonton, Alberta, Canada, .
Berto, L., Saetta, A., Scotta, R., & Vitaliani, R. (2005). Failure mechanism of masonry prism loaded in axial compression: computational aspects. Materials and structures, 38(2), 249-256. https://doi.org/10.1617/14096 https://doi.org/10.1007/BF02479350
Borri, A., Castori, G., Corradi, M., & Speranzini, E. (2011). Shear behavior of unreinforced and reinforced masonry panels subjected to in situ diagonal compression tests. Construction and Building Materials, 25, 4403–4414. https://doi.org/10.1016/j.conbuildmat.2011.01.009
CEN. (2005). EN 1996-1-1: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures." . Brussels, Belgium: European Committee for Standardization.
Corradi, M., Borri, A., & Vignoli, A. (2002). Strengthening techniques tested on masonry structures struck by the Umbria–Marche earthquake of 1997–1998. Constr Build Mater, 16(4), 229–239. https://doi.org/10.1016/S0950-0618(02)00014-4
Crisafulli, F. J., Carr, A. J., & Park, R. (1995). Shear Strength of Unreinforced Masonry Panels. Pacific Conference on Earthquake Engineering, 3, pp. 77-86. Melbourne, Australia.
Croci, G. (1998). The conservation and structural restoration of the architectural heritage. Southampton, UK: Computational Mechanics Publications.
Deodhar, S. V. (2000). Strength of Brick Masonry Prisms in Compression. Journal of the Institution of Engineers (India), 81(3), 133-137.
Dizhur, D., & Ingham, J. M. (2013). Diagonal tension strength of vintage unreinforced clay brick masonry wall panels. Construction and Building Materials, 43, 418–427. https://doi.org/10.1016/j.conbuildmat.2013.02.015
Drysdale, R. G., Hamid, A. A., & Baker, L. R. (1994). Masonry Structures, Behavior and Design. Englewood Cliff: Prentice Hall Inc.
Drysdale, R., Hamid, A., & Baker, L. (1999). Masonry Structures: Behaviour and Design,. The Masonry Society.
EN 1052-3:2002. (2003). Methods of test for masonry – part 3: determination of initial shear strength. Brussels, Belgium: European Committee for Standardization.
EN 1998-1:2004. (2004). Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings.
Faella, C., Martinelli, E., Nigro, E., & Paciello, S. (2010). Shear capacity of masonry walls externally strengthened by a cement-based composite material: An experimental campaign. Construction and Building Materials, 24, 84–93. https://doi.org/10.1016/j.conbuildmat.2009.08.019
Fattal, S. G., & Cattaneo, L. E. (1977). Evaluation of Structural Properties of Masonry in Existing Buildings. Washington, USA: National Bureau of Standards, Department of Commerce. https://doi.org/10.6028/NBS.BSS.62
FEMA 273. (1997). NEHRP Guidelines for The Seismic Rehabilitation of Buildings. Washington D.C.
Hamoush, S., McGinley, W., Woodson, S., & Mlakar, P. (2003). Influence of the FRP reinforcement ratio on the out-of-plane shear strength of externally reinforced masonry wall systems. 9th NAMC, (pp. 180-191). Clemson, South Carolina, USA.
Harris, A. H. (1988). Masonry: Materials, Design, Construction and Maintenance. American Society for Testing and Materials. Baltimore, USA. https://doi.org/10.1520/STP992-EB
Hendry, A., Sinha, B., & Davies, S. (1997). Design of Masonry Structures, Load Bearing Brickwork Design, (Third Edition ed.). UK: E&FN Spoon, UK.
Hilsdorf, H. K. (1969). An investigation into the failure of brick masonry loaded in axial compression. In F. B. Johnson (Ed.), Designing, engineering, and constructing with Masonry Products (pp. 34-41). Houston: Gulf Publishing Company.
Ismail, N., Petersen, R. B., Masia, M. J., & Ingham, J. M. (2011). Diagonal shear behavior of unreinforced masonry wallettes strengthened using twisted steel bars. Construction and Building Materials, 25, 4386-4393. https://doi.org/10.1016/j.conbuildmat.2011.04.063
Jabarov, M., Kozharinov, S., & Lunyov, A. (1980). Strengthening of damaged masonry by reinforced mortar layers. 7th WCEE, 6, pp. 73-80. Istanbul, Turkey.
Kalali, A., & Kabir, M. Z. (2012). Experimental response of double-wythe masonry panels strengthened with glass fiber reinforced polymers subjected to diagonal compression tests. Engineering Structures, 39, 24-37. https://doi.org/10.1016/j.engstruct.2012.01.018
Lourenço, P. B. (1996). Computational strategies for masonry structures. Delft, Netherlands: Delft University of Technology.
Lourenço, P. B. (1998). Experimental and numerical issues in the modelling of the mechanical behavior of masonry. In P. e. Roca (Ed.), Structural Analysis of Historical Constructions II. CIMNE, (pp. 57-91). Barcelona, Spain.
Lumantarna, R. (2012). Material characterization of New Zealand clay brick unreinforced masonry buildings. Auckland, New Zealand: University of Auckland.
Mahmood, H., & Ingham, J. M. (2011). Diagonal compression testing of FRP-retrofitted unreinforced clay brick masonry wallettes. ASCE Journal of Composite Construction, 15(5), 810–20. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000209
Milosevic, J., Gago, A. S., Lopes, M., & Bento, R. (2013). Experimental assessment of shear strength parameters on rubble stone masonry specimens. Construction and Building Materials, 47, 1372-1380. https://doi.org/10.1016/j.conbuildmat.2013.06.036
Montes, P. F. (2001). Behaviour of a hemispherical dome subjected to wind loading. Journal of Wind Engineering and Industrial Aerodynamics, 89, 911-924. https://doi.org/10.1016/S0167-6105(01)00082-4
MSJC. (2002). Building code requirements for masonry structures, ACI 530-02/ASCE 5- 02/TMS 402-02." . Detroit, Michigan, USA: America Concrete Institute, Structural Engineering Institute of the American Society of Civil Engineers, The Masonry Society.
Mustafaraj, E. (2014). Assessment of historical structures: A case study of five Ottoman mosques in Albania. Germany: LAP Lambert Academic Publishing.
Mustafaraj, E. (2016). External shear strengthening of unreinforced damaged masonry walls. PhD Thesis, Epoka University, Tirana, Albania.
Mustafaraj, E., and Yardim, Y. (2016a). Usage of ferrocement jacketing for strengthening of damaged unreinforced masonry (URM) walls. 3rd International Balkans Conference on Challenges of Civil Engineering, 3-BCCCE 2016, 19-21 May, 2016, Tirana, Albania.
Mustafaraj, E., and Yardim, Y. (2016b). External shear strengthening of unreinforced masonry panels using ferrocement jacketing- XVI International Scientific Conference VSU'2016, 9-10 June, 2016, Sofia, Bulgaria.
NHERP. (2000). Recommended Provisions for Seismic Regulations for New Buildings and Other Structures.
Pande, G., Middleton, J., & Krajl, B. (1998). Computer Methods in structural masonry. London, UK: E & FN Spon. https://doi.org/10.4324/9780203223147
Papanicolaou, C., Triantafillou, T., & Lekka, M. (2001). Externally bonded grids as strengthening and seismic retrofitting materials for masonry panels. Construction Building Materials, 25(2), 504-514. https://doi.org/10.1016/j.conbuildmat.2010.07.018
Paulay, T., & Priestley, M. J. (1992). Seismic design of reinforced concrete and masonry buildings. New York, USA: John Wiley & Sons, . https://doi.org/10.1002/9780470172841
Razvi, S., & Saatcioglu, M. (1989). Confinement of reinforced concrete columns with welded wire fabric. (S. Nedwell, Ed.) ACI Structural Journal, 86, 615-623.
RILEM TC. (1994). LUM B6 Diagonal tensile strength tests of small wall specimens. E & FN SPON.
Roca, P., & Araiza, G. (2010). Shear response of brick masonry small assemblages strengthened with bonded FRP laminates for in-plane reinforcement. Construction and Building Materials, 24, 1372–1384. https://doi.org/10.1016/j.conbuildmat.2010.01.005
Rosenthal, I. (1986). Precast ferrocement columns. Journal of Ferrocement, 16, 273-284.
Sahlin, S. (1971). Structural Masonry. Englewood Cliffs, New Jersey: Prentice-Hall Inc.
Schubert, P. (1988). The influence of mortar on the strength of masonry. In J. d. Courcy (Ed.), 8th International Brick and Block Masonry Conference (pp. 162-174). London, UK: Elsevier Applied Science.
Tomazevic, M. (1999). Earthquake-Resistant Design of Masonry Buildings. In Series on Innovation in Structures and Construction, Masonry Materials and Construction Systems (Vol. 1). Imperial College Press. https://doi.org/10.1142/9781848160835_0002 https://doi.org/10.1142/p055
Triantafillou, T. C. (1998). Strengthening of masonry structures using epoxy-bonded FRP laminates. ASCE Journal of Composites for Construction, 2, 96-104. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:2(96)
Turnsek, V., & Sheppard, P. (1980). The shear and flexure resistance of masonry walls. . International Research Conference on Earthquake Engineering. Skopje, Macedonia.
Valluzzi, M. R., Tinazzi, D., & Modena, C. (2002). Shear behavior of masonry panels strengthened by FRP laminates. Construction and Building Materials, 16, 409–416. https://doi.org/10.1016/S0950-0618(02)00043-0
Yardim, Y., & Lalaj, O. (2016). Shear strengthening of unreinforced masonry wall with different fiber reinforced mortar jacketing. Construction and Building Materials, 102, 149-154. https://doi.org/10.1016/j.conbuildmat.2015.10.095
Yardim, Y., & Mustafaraj, E. (2015). Selected Assessment and Retrofitting Application Techniques for Historical Unreinforced Masonry Buildings, in Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures, Asteris & Plevris Eds. (pp. 508-527) Hershey, PA: IGI Global. doi:10.4018/978-1-4666-8286-3 https://doi.org/10.4018/978-1-4666-8286-3
Downloads
Published
How to Cite
Issue
Section
License
Copyright of Published Articles
Author(s) retain the article copyright and publishing rights without any restrictions.
All published work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
