IMPROVING PERFORMANCE IN AN ALUMINUM EXTRUSION PLANT USING DISCRETE EVENT SIMULATION: A CASE STUDY
DOI:
https://doi.org/10.20319/mijst.2019.53.7785Keywords:
Discrete Event Simulation, Aluminum Extrusion, Manufacturing, OptimizationAbstract
Simulation has been used in many industrial applications for performance improvement. It excels over other system analysis methods in its high flexibility and ability to model system details with high accuracy. In this study, Discrete Event Simulation (DES) is used to improve the performance of an aluminum extrusion plant. A case study is presented in a local factory in which problems are identified, and their effects on efficiency are monitored. The main problem noticed was high production rates with respect to demand rates which resulted in large amounts of work-in-process (WIP) inventory. It was found that the current base system is unstable and suggestions were made to lower production rates in order to stabilize it. Average WIP was reduced by 324% once the system was stabilized with only 1.77% difference in weekly throughput which improved the system considerably. Next, alternatives were suggested to improve throughput and reduce WIP while maintaining stability. The alternative with optimized batch sizes had the best improvement in throughput of 3.54%. The combined model with optimized batch sizes and an added pool for chemical treatment had the most WIP versus other alternatives.
References
C. Gárriz, R. Domingo (2017), Simulation, through discrete events, of industrial processes in productive environments, Procedia Manufacturing, 13, 1074-1081, ISSN 2351-9789, https://doi.org/10.1016/j.promfg.2017.09.137
F. Freiberg, P. Scholz (2015), Evaluation of Investment in Modern Manufacturing Equipment Using Discrete Event Simulation, Procedia Economics and Finance, 34, 217-224, ISSN 2212-5671, https://doi.org/10.1016/S2212-5671(15)01622-6
D. Mourtzis, A. Vasilakopoulos, E. Zervas, N. Boli (2019), Manufacturing System Design using Simulation in Metal Industry towards Education 4.0, Procedia Manufacturing, 31, 155-161, ISSN 2351-9789, https://doi.org/10.1016/j.promfg.2019.03.024
R.R. Neeraj, R. Pranav Nithin, P. Niranjhan, A. Sumesh, M. Thenarasu (2018), Modelling and simulation of discrete manufacturing industry, Materials Today: Proceedings, 5(11), Part 3, 24971-24983, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2018.10.298
O. Omogbai, K. Salonitis (2016), Manufacturing System Lean Improvement Design Using Discrete Event Simulation, Procedia CIRP, 57, 195-200, ISSN 2212-8271,. https://doi.org/10.1016/j.procir.2016.11.034
P. Sharma, N. K. Sharma, M.P. Singh (2015). Process Improvement by Implementation of Kaizen as a Quality Tool within Defined Constraints: A Case Study in Manufacturing Industry. MATTER: International Journal of Science and Technology, 1(1), 182-194
Shrivastava, K. Anupam, P. Sharma, S. Sharma (2015). Lean Co-Creation: Effective Way to Enhance Productivity, MATTER: International Journal of Science and Technology, 1(1), 96-107 https://doi.org/10.20319/mijst.2016.s11.182194
S. Velumani, H. Tang (2017), Operations Status and Bottleneck Analysis and Improvement of a Batch Process Manufacturing Line Using Discrete Event Simulation, Procedia Manufacturing, 10, 100-111, ISSN 2351-9789,. https://doi.org/10.1016/j.promfg.2017.07.033
Downloads
Published
How to Cite
Issue
Section
License
Copyright of Published Articles
Author(s) retain the article copyright and publishing rights without any restrictions.
All published work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
